FC No-chlor Shock Oxidizer

$24.99

17% Off

Non-chlorine oxidizing granules, quickly destroys bather waster and other contaminants that can cause odors, eye irritation and cloudy water. Swim again in 15 minutes.

FCH207401 1 lb
FCH207402 2 lb
FCH207406 6 lb
FCH207425 25 lb

Description

Non-chlorine oxidizing granules, quickly destroys bather waster and other contaminants that can cause odors, eye irritation and cloudy water. Swim again in 15 minutes.

FCH207401 1 lb
FCH207402 2 lb
FCH207406 6 lb
FCH207425 25 lb

Additional information

Weight 1 kg
Instructions

DIRECTIONS FOR POOL USE

Read entire label and use strictly in accordance with precautionary statements and directions. Initial Treatment: For pools with moderate daily use, add two lbs of this product per 10,000 gallons of pool water every week.

Maintenance Treatment: Use product at the rate of one pound per 10,000 gallons every week. Use one pound per 10,000 gallons twice weekly when bather loads are extremely heavy or following heavy rains or high winds.

DIRECTIONS FOR SPA USE

Initial treatment:

Use at the rate of 4 ounces per 1000 gallons of spa water. Maintenance Treatment: Use product at the rate of one ounce per 500 gallons every week. If the spa is subjected to daily use, treat at the rate of one ounce per 500 gallons twice weekly.

DIRECTIONS FOR APPLICATION

With the filter pump operating, broadcast uniformly directly into the deep end of the pool or middle of the spa to ensure complete mixing and good circulation. Remove swimmers from pool during treatment. Swimmers may re-enter the water 15 minutes after treatment. Maintain pH in the range of 7.2 to 7.6, total alkalinity in the range of 100 ppm to 150 ppm, and calcium hardness in the range of 150 ppm to 300 ppm.

THIS PRODUCT IS NOT INTENDED AS A REPLACEMENT FOR ROUTINE SANITIZATION USING APPROVED SANITIZERS SUCH AS CHLORINE AND BROMINE

Reviews

There are no reviews yet.

Be the first to review “FC No-chlor Shock Oxidizer”