DIRECTIONS FOR USE:

Use one pound of this product per 3,000 gallons of pool water to provide an initial stabilizer level of 40 ppm. The use of one pound per 4,000 gallons of pool water will provide an initial stabilizer level of 30 ppm. Broadcast directly into the pool, scattering over the surface of the water. For pools with plastic piping, this product may be slowly added through the skimmer. Keep the water circulating continuously. When the chemical reaches the filter, there may be temporary increase in filter pressure which will dissipate as the chemical is dissolved. Do not backwash filter for 24 hours after application of stabilizer.
When used as directed, this product is effective as a spa and hot tub sanitizer and disinfectant. Ensure all spa equipment is working properly. Backwash the filter system following manufacturer’s directions. Adjust pH to between 7.2-7.6. When using other products as outlined in directions for this product, always follow directions on those products. Fill spa bromine feeder with this product and adjust feeder following manufacturer’s directions to yield bromine residual between 2-4 ppm in residential spas and 4-6 ppm in commercial spas. Check feeder regularly and add additional product as needed to maintain the bromine residual. The pump and filter should be operated for at least three hours every day whether spa is used or not. Do not heat water above 102°F. Keep the spa free of leaves and other debris. To maintain clear, clean water and insure the performance of your spa chemicals, spas should be drained and refilled with fresh water every 60 days in residential spas or a minimum of every 7 days in commercial spas.

REENTRY INTO TREATED SPAS IS PROHIBITED ABOVE LEVELS OF 8 PPM BROMINE DUE TO RISK OF BODY INJURY.