DIRECTIONS FOR USE:

SHAKE WELL BEFORE USING.
For best results, adjust pool water pH to 7.5 – 8.0.
Use at a rate of 8 oz. per 10,000 gallons.
Add Super Floc-Out slowly into skimmer with pump on and filter valve in Recirculate or Whirlpool position. For filters without Recirculate position: backwash, with filter in Filter Mode, dilute Super Floc-Out into large plastic pail of water and apply evenly over surface of pool.
Let pump circulate water for 2 hours to distribute Super Floc-Out throughout pool.
Shut off pump. Let Super Floc-Out settle debris to bottom while pool remains undisturbed for 12 to 48 hours (usually, overnight.) Note: The greater the debris in the water, the faster this product works. To speed settling time, you may double or triple dosage.
VACUUM TO WASTE all settled debris with filter in Waste or Drain Mode. Note: Settling may continue for several days if new debris is introduced by wind or rain. If so, vacuum to waste again.
Backwash and clean filter and resume normal filter cycle.
Check pH and re-adjust if needed to 7.2 – 7.6.